MR16 LED
Use our MR16 LED bulbs as replacements for 12v halogen bulbs. These LED bulbs use SMD high power LEDs to replace low voltage 20w and 35w halogen fittings. Please note that all MR16 LED bulbs require a transformer (ballast) capable of delivering a constant voltage with the bulbs connected in parallel.
Some older electronic transformers/ballasts don't work at the low power requirements of LEDs. In that case some customers have reported it is possible that leaving one halogen on a lighting track can help the transformer to provide a clean 12V supply, preventing the LEDs flickering.
Most modern installations will work without problem, but if you install the bulb and it flickers then remove immediately to avoid damage and return for a refund.
MR16 5W LED SMD Warm White
£20.42 (incl VAT)
Our 50W halogen replacement with 120° wide beam and 24 super bright surface mounted LEDs. Ideal for general purpose lighting this 5W LED is the same size as traditional halogens but still incorporates an alloy heat sink.
MR16 5W LED SMD Daylight White
£20.42 (incl VAT)
Our 50W halogen replacement with 120° wide beam and 24 super bright surface mounted LEDs. Ideal for general purpose lighting this 5W LED is the same size as traditional halogens but still incorporates an alloy heat sink.
MR16 LED 3w SMD High Power Warm White
£14.29 (incl VAT)
At last a high quality MR16 LED replacement for halogens. Wide beam angle, diffuse, bright, warm white light, what's not to like?
MR16 LED 3w SMD High Power Daylight White
£14.29 (incl VAT)
A high quality MR16 LED replacement for halogens. Wide beam angle, diffuse, crisp, bright, daylight white light.
LED Driver 700mA Constant Current
£11.24 (incl VAT)
For use with our LED strips or to replace halogen transformers when using MR16 LEDs wired in series. Each driver will power up to 9 strips or 8 3W lamps.
- «« Start
- « Prev
- 1
- Next »
- End »»
